뉴스

뉴스

Automatic correction of Wafios freeform bending machines

AICON offers an additional interface that connects TubeInspect directly with free-form bending machines. This results in automatic correction values being identified for the formed tubes and transmitted to the bending machine. Thus set-up time is shortened considerably.

In the past free-form tubes were in demand primarily from the furniture business for design reasons, these days demand is generated from all industrial areas. Consequently, more tube benders need the right measuring systems which take the particularities of complex free-form tubing into account. This is where AICON's optical measurement system TubeInspect offers an ideal solution. It carries out very precise testing of free-form tube geometries with the help of high-resolution digital cameras.

But now AICON has gone one step further: With immediate effect the company offers an additional interface that connects TubeInspect directly with the free-form bending machine. This results in automatic correction values being identified for the formed tubes and transmitted to the bending machine. Thus set-up time is shortened considerably. A close cooperation with the bending machine manufacturer Wafios from Reutlingen has made this new development possible.

Peter Seidel, Sales Manager of the Tube Business Unit at Wafios AG, explains how this cooperation came about: "It's really important to us that our customers not only get the most innovative bending technology but, parallel to this, get reliable testing methods to carry out their quality assurance. That's why when AICON approached us about working together, we immediately agreed to being a development partner for a direct interface between free-form bending machines and TubeInspect – even though this means giving a very intimate insight into our company's own bending technology and software."

But why is correction on free-form bending machines so complicated? In contrast to tubes manufactured conventionally by draw bending which consist of calculated lines and bends and which feature constant radii, free-form tubes which are manufactured by push bending have a completely different set of parameters. In a CAD system they are often shown as a spline, a tube geometry in which, theoretically, at any point a different radius can exist. When correction takes place on a conventional bending machine, only the LRA values at the individual bending points have to be corrected. In comparison to this, to achieve the desired tube geometry using free-form bending, a multitude of different settings on the bending machine have to be adjusted and the bend radii optimized until the exact tube form has been bent. This set-up has - to date - been an unbelievably time-consuming process with high material usage, so that both automation and shortening of the process were the two main aims. Now TubeInspect has mastered this challenge with the newly developed interface which enables smooth communication between the bending machine and the measurement system.

A practical example: The demand for free-form bent tubes has increased dramatically especially from the automotive industry. Dr.-Ing. Werner Bösemann, Managing Director of AICON 3D Systems GmbH, explains the reasons why: "Design demands or technical necessities call for tube forms, which often can no longer be manufactured on conventional machines. Maximizing efficiency however is another reason why many companies are migrating from conventional bending processes to free-form bending. One of our customers is currently testing the possibility of manufacturing its pipes using push bending, a form of free-form bending. Their calculations show that employing this method would achieve significant cost-reduction, as the bending time per tube is lower." The company which already has a TubeInspect system can, thanks to AICON's new development, connect the measuring machine directly to the Wafios tube bending machine B10 or the BMZ series and in doing so considerably reduce set-up and cycle time.


Further links:
Wafios AG
TubeInspect product info


뒤로

 

품질인증

AICON은
ISO 9001:2008 인증 기업입니다.

AICON 인증서 (PDF)

전화문의

당사의 전문가가 친절히 상담해 드립니다.

+82 (0)31 607 4040

또한 온라인 양식을 통해 문의하실 수 있습니다.

"AICON측정장비의 도입이 당사의 품질보증 역량을 증진시켜 주었습니다."

Florian Windler, 스위스 아도프 소재 Serto社

"AICON 3차원 스캐너로  CMM보다 훨씬 더 빠르게 데이터를 획득할 수 있어 시간을 효율적으로 관리할 수 있게 되었습니다."

Jürgen Weber, 독일 지그마링엔 소재 Messtechnik Zollern社

 
발행 정보이용 약관사이트맵
© 2017 AICON 3D Systems GmbH – Part of Hexagon